Simplifies installations that do not require a conduit, Class 2 outputs standard and may be wired directly to 115VAC input Provides continuous regulated and filtered 12VDC or 24VDC (80-800) Designed specifically to support electric locks and access control systems Provides individual fused protection, field reset On/Off switch allows for easy service and inspection Fire alarm input provides release of fail-safe locks in case of emergency Field selectable outputs Auto-resetting circuit protection Battery charging circuit, PTC protection LED system status indicator Class 2 outputs Heavy gauge enclosure, 18 ga Low battery disconnect when batteries are below 70% capacity Painted Beige Finish

60"L 8 Outlet Power Supply Includes 8 outlets, on/off switch, on indicator light, resettable circuit breaker, 6' cord. Mounts to electrical supply mounting rail which is fully adjustable on uprights or to worksurface. 15A, 125V

The SM1BOE Signal Control Power Supply is designed to convert one (1) alarm input into six (6) siren outputs and one (1) strobe output. The SM1BOE also provides resetable panic output power and aux. power for motion sensors or accessories. Specifications: Input 115VAC / 60 Hz, 1.8 amps. Six (6) speaker outputs. Common speaker driving circuit (keeps speakers in phase). Six (6) alarm silence switches. One (1) alarm strobe output (2 amps max.). Isolated Trigger input. AC and Battery Fail LED indication. Trigger and Emergency LED indicator on front panel. Isolated trouble LED input 12VDC to 24VDC. Exterior speaker circuit breaker protection (PTC). Strobe output circuit breaker protection (PTC). Resetable 12VDC Panic Output. 12VDC auxiliary power output (2 amps max.). Four (4)... Less

Model SMP10 power supply converts low voltage AC input, to a 12VDC or 24VDC @ 10 amp of continuous supply current output. Dimensions (approximate): 7 x 4.25"W x 2.3"H Features 12VDC or 24VDC selectable output 10 amp continuous supply current Transformer requirements: - 28VAC/175VA for 12VDC @ 10 amp output (Altronix Model # T28140) - 28VAC/175VA for 24VDC @ 6 amp output (Altronix Model # T28140) - 28VAC/300VA for 24VDC @ 10 amp output (Altronix Model # T28300) Filtered and electronically regulated outputs Short circuit and thermal overload protection Built-in charger for sealed lead acid or gel type battery backup Maximum charge current .7 amp Zero voltage drop upon transfer to battery backup AC input and DC output LED... Less

72"L 8 Outlet Power Supply Includes 8 outlets, on/off switch, on indicator light, resettable circuit breaker, 6' cord. Mounts to electrical supply mounting rail which is fully adjustable on uprights or to worksurface. 15A, 125V

Central terminal connections provide easy wiring Inline fuse protects against power surges Designed specifically to support electric locks, access control systems and delayed egress systems Multiple fire alarm relay input options assure compliance to various life safety codes On/Off switch allows for easy service and inspection Power supply and controller all in one box Controls up to 2 separate doors for standard egress or 2-door interlock applications 1 controller required for each independent delayed egress application Output relays for locks, local alarm and remote alarms Relays may be configured to wet or dry connections Status LED's toggle on or off for easy troubleshooting Connections are labeled with either numbering scheme or label with text to identify... Less

Power Supply to 13.5 DC w/ Connector - PS-110   Optional Battery Back-up Features & Benefits:   Compatible with the following time clocks: HP-1000 HP-1000E HP-2000 HP-3000 HP-4000

The HP Procurve 620 Is An Ac Powered 1u Package That Connects To A Network Switch Through Cables To Provide The Switch With One Or More Of The Following: Redundant 12v Power For The Network Switch Circuitry, Redundant Poe Power For Poe Devices Connected To A Poe Network Switch, Extended Poe Power For Poe Devices Connected To A Poe Network Switch. The HP Procurve 620 Utilizes Three Internal Power Supplies, And If Any One Of Them Fails, The Unit Will Continue To Report Its Status To All Connected Switches. It Will Continue To Provide Support To The Extent Possible With The Power That Remains Available.

This is a replacement power supply board for an Image 800 Q treadmill. Maintenance Tip: #1 Cause of Power Supply Board Failure is from Electrical Surges. Protect your New Power Supply Board by Purchasing the Deluxe Surge Protector too.>>

Power Supply Cord, Speciality Type, Length 8 Ft., Bare Connector End, Sjo Cord Type, 14/3 Gauge / Conductor, Black Rubber Jacket, 15 Amps Max. Load, Nema Plug Configuration 6-15p, Nominal Outside Dia. 0.375 In., Temp. Range 32 To 194 Degrees F, Voltage Rating 250

Universal AC Input Uninterrupted power to 48 V loads Optional 1146B2 Power Distribution Unit provides 32 standard 110 type load connections Easily wall or rack mounted Buy with Confidence. Your order also includes: MetrolineDirect's Rock Solid One Year Warranty

KM KM80/FL/E/C Power supply (KM80FLEC) Product Details: Manufacturer: KMItem Condition: New ItemPart Number: KM80/FL/E/CProduc t Type: PartsTechnology Category: N/ASanworks SKU#: SWN01590990 Days Unlimited WarrantyExtended Warranty AvailableOne Year Product Support with Sanworks Included100% Satisfaction or Your Money BackIn StockGot specification or compatibility questions? Please do not hesitate to E-mail us. We have 24/7 live sales and services available after-hours as well. Data Storage Specialists are standing by to assist.

300w Power Supply

Power Supply (Single Sensors)

Product Description The Bellatrix LED fixture is the ideal lighting solution where space and power consumption is critical. Breakthroughs in the latest LED technology allow the Bellatrix to operate for 50,000 hours while maintaining optimum luminous flux. 25 watt Wall Plug Power Supply for use with Bellatrix LED fixtures. Rated for 1 AMP. Input is 100-240V AC and output is 24V DC. Model: EPS02424PUV4