Building Supplies

Hand and Power Tools

Alcoa shutterplugs are the easy way to install your Alcoa Vintage exterior vinyl shutters. Simply drill a 1/4" hole through the vinyl shutter into the side of the building, tap the shutterplugs in with a hammer, and you are done. The shutter installation is permanent and the shutterplugs will not back out after they are installed.

Fasco Centrifugal Blower - 115 Volts 1200/1400 RPM Features Sleeve Bearings

Curtronizer NSF APPROVED OFFICE, RESTAURANT AND FREEZER STRIP CURTAIN DOOR The Perfect Door For Office Or Room Dividers, Restaurants And Freezers. The Curtronizer Strip Door is one of the fastest, easiest strip door kits in the industry. NSF Approved Strip Traffic Doors separate environments from temperature, weather, noise, dust, and other airborne pollutants, making them the perfect doors for office areas, room dividers, restaurants, walk-in coolers, and freezers. USDA Low Temperature Polar Reinforced Strips are for Cooler and Freezer door use (temperature resistant from -20 to +140 degrees F). Pre-punched 6 wide x 0.06 thick strips are mounted on 2 centers allowing for a 67% (2) overlap for secure sealing. Interior strip curtain door kits can be easily trimmed... Less

Alcoa shutterplugs are the easy way to install your Alcoa Vintage exterior vinyl shutters. Simply drill a 1/4" hole through the vinyl shutter into the side of the building, tap the shutterplugs in with a hammer, and you are done. The shutter installation is permanent and the shutterplugs will not back out after they are installed.

Provides the ability to test the 3M Accuspray Spray Gun Model HG09, part number 16570, for HVLP compliance.

Vestige widespread hex wrench

Alcoa shutterplugs are the easy way to install your Alcoa Vintage exterior vinyl shutters. Simply drill a 1/4" hole through the vinyl shutter into the side of the building, tap the shutterplugs in with a hammer, and you are done. The shutter installation is permanent and the shutterplugs will not back out after they are installed.

20" Head Assembly - 2670 CFM 5 Mounting OptionsGuard Meets OSHA StandardsGalvaniz ed Steel Propeller15 Foot Three Conductor Supply Cord and PlugNon- oscillating, 1/15 HP, 2 Speed, 115V, 1 Phase, Totally Enclosed Air Over Ball Bearing MotorUL/CUL Listed3 Year Warranty 24.00 L. 24.00 W. 10.00 H.

Alcoa shutterplugs are the easy way to install your Alcoa Vintage exterior vinyl shutters. Simply drill a 1/4" hole through the vinyl shutter into the side of the building, tap the shutterplugs in with a hammer, and you are done. The shutter installation is permanent and the shutterplugs will not back out after they are installed.

Explosion Proof High Pressure Exhaust Fan - 24" This High Pressure Exhaust Fan removes fumes, dust and smoke. Direct driven exhaust fan is ideal for mills, mines, foundries & factories. Fan blades are made of heavy duty one-piece cast aluminum to provide spark-free operation. Frame is made of heavy duty steel venturi that is completely arc welded with tubular supports. Exhaust fan features explosion proof ball bearing motor. Gray enamel finish. Single phase design. Horsepower rating based upon maximum speed/load.

9/16" BORON Hardened Steel Chain w/Sleeve, 3-1/2' Long 9/16" (14mm) BORON Hardened Steel Chain with sleeve. 3-1/2' (110cm) length (Bag Supplied) works with all XENA locks.

Adorn your doors, cabinets and other furniture with the rustic style of these hand-forged iron clavos. Sold in set of 6 clavos. Made of hand-forged iron. Available in three sizes: Small: 3/4" L x 3/4" W head with 1" long shank. Medium: 1-1/4" L x 1-1/4" W head with 1" long shank. Large: 1-1/4" L x 1-1/4" W head with 3" long shank. Sold in set of 6 clavos. Easy to install. Simply drill a small pilot hole and tap in with a rubber mallet. For decorative purposes only. Shown in Natural Black finish. Rust finish is actual oxidized iron, a living finish.

Ideal SEPTLS4205708 Helpful in hard to reach areas, they feature deep slotted screw design that prevents screwdrivers form slippage and puncturing the hose wall. Hex clamps can be installed with a screwdriver, nutdriver or socket wrench.

The Handler 125 operates off 115-volt household current. Comes ready to weld without shielding gas using .030-.035 in (0.8-0.9 mm) flux cored wire. MIG-Ready means This welder...

120 Volt Variable Speed Spiral Saw Kit - RZ2000-55. XSHIELD 2 Flush Guard Attachment. Multi-Purpose XBIT. Drywall XBIT. Metal Zip Wheel. Collets - 1/8-in, 5/32-in, 1/4-in. Accessory Case. Premium Storage Bag & 120 Volt Variable Speed Spiral Saw Kit - RZ2000-55. XSHIELD 2 Flush Guard Attachment. Multi-Purpose XBIT. Drywall XBIT. Metal Zip Wheel. Collets - 1/8-in, 5/32-in, 1/4-in. Accessory Case. Premium Storage Bag

Explosion Proof High Pressure Exhaust Fan - 24" This High Pressure Exhaust Fan removes fumes, dust and smoke. Direct driven exhaust fan is ideal for mills, mines, foundries & factories. Fan blades are made of heavy duty one-piece cast aluminum to provide spark-free operation. Frame is made of heavy duty steel venturi that is completely arc welded with tubular supports. Exhaust fan features explosion proof ball bearing motor. Gray enamel finish. Single phase design. Horsepower rating based upon maximum speed/load.

Explosion Proof High Pressure Exhaust Fan - 30" This High Pressure Exhaust Fan removes fumes, dust and smoke. Direct driven exhaust fan is ideal for mills, mines, foundries & factories. Fan blades are made of heavy duty one-piece cast aluminum to provide spark-free operation. Frame is made of heavy duty steel venturi that is completely arc welded with tubular supports. Exhaust fan features explosion proof ball bearing motor. Gray enamel finish. Single phase design. Horsepower rating based upon maximum speed/load.

Prop/Front Safety Guards for 18" EPR Fan 22.00 L. 20.00 W. 5.00 H.